RAD Data comm ASMi-31 - Manual (Page 17)

ASMi-31 Installation and Operation Manual Chapter 1. Introduction
16-03-00 15:51 Technical Specifications 1-5
1.4 Technical Specifications
Line Interface Type 2-wire, full duplex unconditioned telephone
line (twisted pair), using echo-cancellation
Line Coding 2B1Q
Range Up to 8 km (5 miles), over a 24 AWG wire,
independent of data rate
Level Up to 14 dBm (assuming a 135Ω load)
Connector Type 3-clip terminal block and RJ-45 connector
Standard Complies with ANSI T1.601.1988
specifications
Digital Interface
(DTE) Types ITU V.24/RS-232, V.35, RS-530 or X.21,
G.703 Codirectional (64 kbps),
Ethernet (10BT), Ethernet 10B2 (BNC)
Data Rates 1.2 kbps to 128 kbps
Connectors
•
V.24 – 25-pin, D-type female
•
V.35 – 34-pin, female
•
V.36 – 37-pin, D-type female, via supplied
cable adapter
•
X.21 – 15-pin, D-type female
•
RS-530 – 25-pin, D-type female
•
G.703/TB – Terminal Block
•
G.703/RJ – RJ-45, female
•
Ethernet (10BaseT) – RJ-45, conforms to
IEEE 802.3
•
Ethernet (10Base2) – BNC
Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com