Controls and functions, 1 cinemawall at a glance, Controls and indicators – Runco CW-42HD User Manual
Page 15: Figure 2-1 . cinemawall controls and indicators, Iminar, Cinemawall at a glance, 1. cinemawall controls and indicators, Pre l iminar y
Runco CinemaWall Owner’s Operating Manual
5
PRE
L
IMINAR
Y
2.1
CinemaWall at a
Glance
Figure 2-1, Figure 2-2 and Figure 2-3 show the locations of the CinemaWall controls,
indicators and connectors.
Controls and Indicators
Figure 2-1. CinemaWall Controls and Indicators
1.
POWER BUTTON
Turns the monitor’s power on and off.
2.
REMOTE CONTROL SENSOR
Receives the signals from the remote control.
3.
POWER/STANDBY INDICATOR
- Lights red to indicate that the CinemaWall is in standby mode;
- Lights green to indicate normal operation;
- Flashes red to indicate that the internal temperature is too high.
4.
INPUT SELECT/EXIT
Press this button to switch inputs, or exit the current menu if an On-Screen Display
(OSD) menu is visible.
2. Controls and Functions
MENU / ENTER
INPUT SELECT
DOWN
UP
LEFT/-
RIGHT/+
/EXIT
VOLUME
4
5
6
7
1
Located on bottom
of Plasma
Located on bottom
of Plasma
3
2