4 connections to the cinemawall, Connecting the cinemawall to source components, Figure 3-3 . cinemawall connection diagram – Runco CW-42HD User Manual
Page 28: Connections to the cinemawall, 3. cinemawall connection diagram, Pre l iminar y
18
Runco CinemaWall Owner’s Operating Manual
PRE
L
IMINAR
Y
3.4
Connections to the
CinemaWall
Proceed as follows to connect the CinemaWall to your video sources, external controller(s)
-- if present -- and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
• Use the left audio input when connecting mono audio sources.
Connecting the
CinemaWall to Source
Components
Connect your video sources to the CinemaWall as shown in Figure 3-3 and described in
the sections that follow.
Figure 3-3. CinemaWall Connection Diagram
➤
VCR or Laser Disc Player
VIDEO 1 / VIDEO 2
AUDIO 1 L/R
AUDIO 2 L/R
PC/RGB
EXTERNAL CONTROL (RS-232)
REMOTE IN
REMOTE OUT
DVD/HD1
DVD/HD2
DVD Player
IBM VGA or Compatibles
Monitor adapter for Macintosh
Macintosh or Compatibles
(Desktop type)
HD Set Top Box or DVD Player
with HDMI or DVI Output
PC or
Automation/Control
System
Wired Remote Control
Wired IR Input of
Other Equipment
AUDIO 3 L/R