Runco VX-2000d - Manual (Page 31)

Installation
Runco VX-2000d Owner’s Operating Manual 19
PRE
L
IMINAR
Y
3.2
Quick Setup Table 3-1 gives a quick overview of the VX-2000d installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, Refer to
page...
1 Choose a location for the projector 20
2 Connect the DHD Controller to the projector 25
3 Connect signal sources to the DHD Controller 26
4 Connect external controller to RS-232 port (optional) 30
5
Connect other home theater components to 12-volt trigger
outputs (optional) 30
6 Apply power to the projector 32
7
For rear-screen and/or ceiling-mount installations, select
the proper picture orientation 32
8
Primary lens adjustments: projected image size (zoom),
position (shift) and focus 22, 33
9 Install CineWide anamorphic lens (optional) 34
10
CineWide lens adjustments: position, pitch (angle),
geometry and focus 35
11
Projector calibration – Analog 1080i and
lower-resolution signals:
Adjust the following for Component SD input; save settings
when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
39 through 52
12
Repeat Step 11 for S-Video 1, S-Video 2, Composite
Video, HD1 and HD2 inputs
13
Projector Calibration – Digital 1080i or 1080p signals:
Adjust the following for HDMI 1 and HDMI 2 inputs:
• Brightness
• Contrast
• Color level
• Tint
• Input position 52 through 60
Note