RuggedCom RSG2300 - Manual (Page 11)

2. RuggedSwitch® Modules
RuggedCom® RuggedSwitch® 11 RSG2300 Installation Guide Rev 110
2. RuggedSwitch® Modules
2.1. Ethernet Panel Description
The RSG2300 Ethernet connectors are organized into three banks of eight 10/100Tx copper ports
(for a total of 24 fixed 10/100Tx ports), and four modular slots.
Slots 1 and 2 support two-port fiber or copper modules up to 100Mbps. RSG2300P comes
standard with a two-port 10/100BaseTx 802.3af (PoE) module in Slot 2, and may be ordered with
another two PoE ports in Slot 1.
Slots 3 and 4 support two-port modules up to 1Gbps. Section 4.5, “Fiber Ethernet Port
Specifications” lists and provides specifications for the fiber optic interfaces available for the
RSG2300. The complement of modules installed in a particular unit is determined by reading the
factory data file using the RuggedSwitch® ROS® user interface.
Figure 2.1. Ethernet and LED Display Panels
Each Ethernet module is equipped with an LED per port that indicates link/activity status
information. The LED is solid for ports with a valid link, and blinks for activity.
Figure 2.2, “Ethernet
Panel LEDs” shows a copper port module in slot 1 and a fiber module in slot 2, along with the
link and activity LEDs for each port.
Figure 2.2. Ethernet Panel LEDs