Installation, Glass door installation standard flush door – Regency IG34-LPG User Manual

Page 18

Advertising
background image

18

Regency IG34 Gas Inbuilt Fireplace

INSTALLATION

GLASS DOOR INSTALLATION

STANDARD FLUSH DOOR

The standard fl ush door comes with a black frame. To install the frame
and glass door, simply hook the top door fl ange onto the top of the unit
and swing the door towards the unit, diagram 1. Be careful that the glass
gasket does not roll up; there must be a gap between the gasket and the
door lip to ensure that the door sits securely on the unit. See Diagram 2.

Use the hook to pull the spring out until you can put the hook
into the slot on the bottom door bracket. Repeat for 2nd spring.
See diagram 3.
To remove the fl ush door, reverse the above steps.

To remove the fl ush door, reverse the above steps.

Diagram 2

Diagram 1

Diagram 3

Advertising
This manual is related to the following products: