Regency IG34-LPG - Manual (Page 21)

21 Regency IG34 Gas Inbuilt Fireplace
INSTALLATION
Back of Faceplate
Back of Faceplate
Bracket
Thermodisc
1) Install faceplate and door frame as per previous page.
2) After faceplate has been installed - place the touch pad (facing
out) in the knockout located on the left side of the faceplate.
3) Secure with 2 screws as shown below.
4) Take the limit switch harness and slide the thermodisc into the
bracket located on the top backside of the faceplate. Secure with
2 screws as shown below.
5) Secure wiring along the vertical right side of the faceplate
(facing the back of the faceplate) with supplied grey adhesive clips.
6) Slide unit into fi nal position.
THERMODISC INSTALLATION