Renesas Emulator Debugger M16C PC4701 - Manual (Page 266)

9.2.7 Character constants
The specified character or character string is converted into ASCII code and processed as a constant.
•
Enclose characters in single quote marks.
• Enclose character strings in double quote marks.
• The character string must consist of one or two characters (16 bits max.). If more than two
characters are specified, the last two characters of the string are processed. For example, "ABCD"
would be processed as "CD", or value 4344h.
9.2.8 Operators
The table below lists the operators that you can use in expressions.
•
The priority of operators is indicated by the level, level 1 being the highest and level 8 the lowest.
If two or more operators have the same level of priority, they are evaluated in order from the left
of the expression.
Operator Function Priority level
( ) Brackets level 1
+, -, ~ Monadic positive, monadic
negative, monadic logical NOT
level 2
*, / Dyadic multiply, dyadic divide level 3
+, - Dyadic add, dyadic subtract level 4
>>, Right shift, left shift level 5
& Dyadic logical AND level 6
|, ^ Dyadic logical OR, dyadic
exclusive OR level 7
<, <=, >, >=, ==, != Dyadic comparison level 8
252