Renesas Emulator Debugger M16C PC4701 - Manual (Page 65)

5 Setup the Debugger
5.3.1.1.1. Select the Processor Mode
Specify the processor mode for the target system.
Either the following can be specified.
•
Single-chip Mode
Single-chip Mode
• Memory Expansion
Memory Expansion Mode
• Microprocessor
Microprocessor Mode
5.3.1.1.2. Inspecting the MCU status
Clicking this tab displays the status of each MCU pin. It allows to check whether the MCU pin status
matches the processor mode to be set.
If the slider is at the middle position, it means that the value is indeterminate.
5.3.1.2 Emulation Memory Tab
The specified content becomes effective when the next being start.
51