Runco VIDEO XTREME VX-33I - Manual (Page 41)

Runco VX-33i Installation/Operation Manual 25
PRE
L
IMINAR
Y
Install Lens Motor: Position the AutoScope Lens Motor (item #1) as shown in Figure
3-8. Line up the mounting holes on the lens motor housing with those on the underside of
the projector. Secure the motor to the projector with the six remaining M6 x 12mm
Pan-Head Phillips screws (item #2).
Figure 3-8. AutoScope Lens Motor Installation
After you have installed the AutoScope lens motor, proceed with Mounting the VX-33i
(page 27).