Runco VIDEO XTREME VX-33I - Manual (Page 61)

Runco VX-33i Installation/Operation Manual 45
PRE
L
IMINAR
Y
4.1
Using the On-Screen
Menus To display the Main Menu, press the MENU button on the remote control (Figure 2-4) or
projector rear panel (Figure 2-2).
To select a menu item, use the and buttons on the remote control or projector rear
panel to highlight it. Then, to confirm your selection, press ENTER on the remote control
(or SELECT on the projector rear panel).
The VX-33i OSD menus are arranged hierarchically, as shown in Figure 4-1. Depending on
the selected input source and signal characteristics, some menu options may not be
available.
4. Operation