Ricoh Aficio BP20N - Manual (Page 106)

P
RINTING
T
ASKS
4.29
4
Using the Status Monitor
If an error occurs while printing, the Status Monitor window
appears, showing the error.
N
OTE
s:
• The Status Monitor program can only be used if you connect the
printer to your computer with the USB cable, or on the network.
• You can use the Status Monitor in Windows 98/Me/NT 4.0/2000/XP.
Installing Status Monitor
1 Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and an maintenance
window appears.
If the maintenance window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter of your drive and click OK.
2
Click Next .
3
Select Custom installation. Click Next.
4
Select your printer and click Next.
N OTE s : If your printer is not already connected to the computer, the
following window will appear.
• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click Next,
and No on the following screen. Then the installation will start
and a test page will not be printed at the end of the installation.
5 Click Status Monitor and then click Next.