Ricoh Aficio BP20N - Manual (Page 32)

S
ETTING
U
P
Y
OUR
P
RINTER
2.13
2
For Network Printing
You can attach your BP20N printer to a network using an
Ethernet cable (UTP cable with RJ.45 connector).
1 Make sure that both the printer and the computer are
turned off.
2 Plug one end of the Ethernet cable into the Ethernet
network port on the Printer.
3
Plug the other end of the cable into a network LAN
connection.
See your computer User’s Guide, if you need help.
Supported Operating Systems
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
Item Requirements
Network Interface 10/100 Base-TX (standard for BP20N)
Network Operating
System
• Windows 95/98/Me/NT 4.0/2000/XP
Network Protocols • TCP/IP
Dynamic Addressing
Server
• DHCP, BOOTP
To the network LAN connection