Ricoh Aficio BP20N - Manual (Page 84)

P
RINTING
T
ASKS
4.7
4
Source
Make sure that Source is set to the
appropriate paper tray.
Use the Manual Feed source when printing
to special material. You need to load one
sheet at a time into the Multipurpose tray. See
page 3.12.
If you install an optional Tray 2 and set the
Tray 2 in printer properties (see page B.7),
you can select Tray2.
If the paper source is set to Auto Select, the
machine automatically picks up print material
in the following order: the Multipurpose tray,
Tray 1, and optional Tray 2.
Type
Make sure that Type is set to Printer
Default. If you load a different type of print
material, select the corresponding paper type.
For more information about print materials,
see Chapter 3, Using Print Materials.
If you use cotton paper, set the paper type to
Thick for the best printing.
To use recycled paper, which weighs from
75g/m
2 to 90g/m 2 (20lb to 24lb), or colored
paper, select Color Paper.
First Page
This property allows you to print the first page
using a different paper type from the rest of
the document. You can select the paper
source for the first page.
For example, load thick stock for the first
page into the Multipurpose tray, and plain
paper into Tray1. Then, select Tray1 in the
Source option and Multi-Purpose Tray in
the First Page option.
Scaling
Scaling allows you to automatically or
manually scale your print job on a page.
You can choose from None, Fit to Page, and
Reduce/Enlarge. For details, see
page 4.19~4.20.
Property Description
3
4
5
6