Ricoh Aficio BP20N - Manual (Page 43)

2.24 S
ETTING
U
P
Y
OUR
P
RINTER
Installing Software for Network Printing
When you connect your printer to a network, you must first configure
the TCP/IP settings for the printer. After you have assigned and verified
the TCP/IP settings, you are ready to install the software on each
computer on the network.
You can install the printer software using the typical or custom method.
Typical Installation
This is recommended for most users. All components necessary for
printer operations will be installed.
In Windows 98/Me and NT4.0, Multi Direct Print Type S will be
installed as a network printer port, too.
1
Make sure that the printer is connected to your network and
powered on. For details about connecting to the network, see the
Administrator Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window
appears.
If the installation window does not appear, click
Start and then
Run . Type X:\ Setup.exe , replacing “X” with the letter which
represents your drive and click OK .
3
Click Next .
• If necessary, select a language from the drop-down list.
•
View User’s Guide : Allows you to view the User’s Guide and
Administrator Guide. If your computer doesn’t have Adobe
Acrobat, click on this option and it will automatically install
Adobe Acrobat Reader for you.