Ricoh Aficio BP20N - Manual (Page 51)

2.32 S
ETTING
U
P
Y
OUR
P
RINTER
Using the Set IP (BP20N only)
The Set IP can detect printers in the same network and display the
network information. In addition, this application can configure the
network information of the printer that has own network interface card.
Installing Set IP
1 Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and a
maintenance window appears.
If the maintenance window does not appear, click
Start and then Run. Type
X:\Setup.exe, replacing “X” with the letter of your
drive and click OK.
2 Click Next.
3 Select Custom installation or Typical installation for
a network printer . Click Next.
4
Select your printer and click Next .
N OTES : If your printer is not already connected to the computer, the
following window will appear.
• After connecting the printer, click Next .
• If you don’t want to connect the printer at this time, click Next,
and No on the following screen. Then the installation will start
and a test page will not be printed at the end of the installation.
5 Check Set IP and then click Next.
6
When the installation is completed, click Finish.