Radio Shack 43-327 - Manual (Page 13)

13
Te
le
ph
on
e S
et
up
LCD Language
You can select ENGLISH, FRANÇAIS or ESPAÑOL to
be used in all screen displays.
1. Press MENU/SELECT to show the menu.
2 Press  or  to select
>LCD LANGUAGE, then
press MENU/SELECT.
3. Press  or  to scroll through the choices.
4. Press MENU/SELECT to confirm your selection.
Set Date and Time
The answering system announces the day and time of the message prior
to playing it. Before using the answering system, set the date and time as
follows.
1. Press MENU/SELECT to show the menu.
2. Press  or  to select
>SET DATE/TIME, then press
MENU/SELECT.
3. Press the number keys (0-9) to enter a two-digit
number or press  or  until the screen displays
the correct value. Press MENU/SELECT to advance.
4. Repeat step 3 until the date and time are set.
n
Notes:
• If you subscribe to caller ID service, the date and
time are set automatically with each incoming call.
The year must be correct so that the day of the week
can be calculated from the caller ID information.
• If the date and time are not set, the system announces,
“Time and day not set,” before each message plays.
Clear Voicemail
If you subscribe to voicemail service offered by your telephone company,
when you have new voicemail messages NEW VOICEMAIL and appear
on the handset, and the VOICEMAIL light on the telephone base flashes.
Contact your local telephone company for more information and assistance
about using your voicemail service.
After you have listened to all new voicemail messages, the indicators on
both the handset and telephone base turn off automatically.
>LCD LANGUAGE
SET DATE/TIME
>LCD LANGUAGE
SET DATE/TIME
LCD LANGUAGE
ENGLISH LCD LANGUAGE
ENGLISH
>SET DATE/TIME
CLR VOICEMAIL
>SET DATE/TIME
CLR VOICEMAIL
SET DATE
12/25/08 SET DATE
12/25/08
SET TIME
03:18 AM SET TIME
03:18 AM