Radio Shack 43-327 - Manual (Page 19)

1
Te
le
ph
on
e
O
pe
ra
tio
n
Mute
The mute function allows you to hear the other party
but the other party cannot hear you.
1. During a call, press MUTE/REMOVE on the handset.
The handset screen shows MUTED for a few seconds.
MUTE
appears at the bottom of the screen until the
mute function is turned off.
2. Press MUTE/REMOVE again to resume the
conversation. The handset screen temporarily shows
MICROPHONE ON
.
Ringer Mute
When the telephone is ringing, press OFF/CLEAR
or MUTE/REMOVE to temporarily silence the ringer
without disconnecting the call. The next call rings
normally.
Call Waiting
If you subscribe to call waiting service from your telephone company, you
hear an alert tone if there is an incoming call while you are on another call.
Press
/FLASH to answer the new incoming call. Press /FLASH again
to return to the original call.
Find Handset
Use this feature to page all system handsets.
Press FIND HANDSET on the telephone base. All idle
handsets ring and the screens show ** PAGING **.
To end paging, press
/FLASH, , any dialing keys
(0-9, #, *), or press FIND HANDSET on the telephone
base.
Chain Dialing
Use this feature while already dialing one phone number or while on a call
to initiate a dialing sequence from numbers stored in the directory, stored in
the call log, or from the most recent redial phone number. Chain dialing can
be useful when accessing numbers other than phone numbers (such as bank
account information or access codes).
PHONE 0:00:00
MUTED
MUTE
PHONE 0:00:00
MUTED
MUTE
RINGER MUTE RINGER MUTE