Battery installation and charging, Te le ph on e se tu p – Radio Shack 43-327 User Manual

Page 6

Advertising
background image



Te

le

ph

on

e

Se

tu

p

Battery Installation and Charging

Install the battery as shown below. For best performance, charge the

handset for at least 16 hours before use. When not in use, place the handset

in the telephone base or charger. See page 41 for battery operating times.

1. If the battery compartment cover is on the handset, press the

indentation and slide the cover to remove.

2. Plug the battery securely into the plug inside the handset battery

compartment, matching the color-coded label.

3. Place the battery with the label THIS SIDE UP facing up and the wires

inside the battery compartment.

4. Align the cover flat against the battery compartment, then slide it

towards the center of the handset until it clicks into place.

. Charge the handset by placing it in the telephone base or charger. The

CHARGE light is on when the handset charges.

n

Notes:

• When the screen shows LOW BATTERY, the backlight is off.
• If the handset will not be used for a long time, disconnect and remove

the battery to prevent possible leakage.

• To purchase replacement batteries, visit your local RadioShack store or

go to www.RadioShack.com.

Match with

color code label

Red wire

Black wire

Advertising