Radio Shack 43-327 - Manual (Page 20)

20
Te
le
ph
on
e
O
pe
ra
ti
on
To access a number in the directory while on a call:
1. Press MENU/SELECT twice to select >DIRECTORY.
2. Scroll to the desired entry by pressing  or .
3. Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
1. Press MENU/SELECT and then press  or  to highlight >CALL LOG.
2. Press MENU/SELECT to select.
3. Scroll to the desired entry by pressing  or .
4. Press MENU/SELECT to dial the displayed number.
To access the last number on the redial list while on a call:
Press REDIAL/PAUSE to dial. Press REDIAL/PAUSE again within two
seconds to cancel the chain dialing.
Multiple Handset Use
You can use up to two system handsets at a time on an outside call. If
a handset is already on a call and you would like to join the call, press
/FLASH or on another handset to join the call.
To end the call, press OFF/CLEAR or place the handset in the telephone
base or charger. The call will not be terminated until all handsets hang up.
You can buy additional expansion handsets for this telephone base from
your local RadioShack store or at www.RadioShack.com. You can register up
to 12 handsets to the telephone base.
The first nine handsets that you register are named HANDSETS 1-9. Use
the handset number to intercom and transfer calls. Although the names
for handsets 10-12 appear in their displays as 10-12, when you intercom or
transfer to one of them, you must use *0 for HANDSET 10, *1 for HANDSET
11
, and *2 for HANDSET 12.
Intercom
You can have a conversation between two system handsets, so you can call
someone in another room of your home.
1. Press INT on your handset when not in use.
• If you have a two-handset system, your handset
screen shows CALLING OTHER HANDSET.
CALLING
OTHER HANDSET
CALLING
OTHER HANDSET