Runco LIGHTSTYLE LS-10D - Manual (Page 103)

Runco LS-10d Installation/Operation Manual 87
PRE
L
IMINAR
Y
7.1
LS-10d Specifications Table 7-1 lists the LS-10d specifications.
7. Specifications
Table 7-1. LS-10d Specifications
Projector Type: Digital Light Processing™ (DLP), 3-chip, 16:9 SuperOnyx™
DMD™
Native Resolution: 1,920 x 1,080 (2,073,600 pixels)
Aspect Ratios: Refer to Table 7-2
Video Standards: Refer to Table 7-2
DTV Compatibility: 480i, 480p, 576i, 576p, 720p, 1080i 50/60, 1080p 24/50/60
Picture Size (16:9 Screen): Recommended Width: 72 - 120 in.
Maximum Width: 180 in.
Throw Distance
(Factor x Screen Width): Refer to Table 3-3
Horizontal and Vertical
Offset: Proteus 1: None
Proteus 2, 3, 4, 5, 6:
Horizontal: 30% of screen width left or right
Vertical: 65% of screen height up or down
Lamp: 230/260W (selectable) HPM lamp
Estimated Lamp Life: 2000 hours, typical (260W power setting);
3000 hours, typical (230W power setting);
Inputs
(from DHD Controller): (1) HDMI with HDCP
(1) RS-232
Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 400 Watts
(1365.2 BTUs/hour)
Operating Environment: 50°F to 104°F (10°C to 40°C), 0% to 85% humidity
(non-condensing)
Dimensions: See Figure 7-1