Pre l iminar y – Runco LIGHTSTYLE LS-10D User Manual
Page 41
Runco LS-10d Installation/Operation Manual
25
PRE
L
IMINAR
Y
3.
If you are mounting the projector on a ceiling: Line up the holes on the Ceiling
Mount Plate (included with the projector ceiling mount kit) with those on the bottom of
the projector and attachment plate.
4.
Secure the Transport Assembly Attachment Plate and Ceiling Mount Plate to the
projector using the hardware provided with the attachment plate, as shown.
1. Do not use the mounting screws provided with the ceiling
mounting kit. Use only the hardware provided with the Transport
Assembly Attachment plate.
2. DO NOT OVER-TIGHTEN THE SCREWS.
Caution
Screw, Phillips PH,
M4 x 30mm
Lock Washer
Flat Washer
5/8" Nylon Spacer
Ceiling Mount Plate
Attachment Plate
Projector (bottom)
Hardware for Attachment Plate
and Ceiling Mount Plate (4 Places):
Attachment Points
for Security Hooks