Olympus C-2040ZOOM - Manual (Page 121)

121
4
Custom Photography
Panorama mode
•
Panorama mode is available only when an Olympus brand standard card is
used.
•
The camera itself cannot create composite panorama images. You must
use the CAMEDIA Master software.
•
The focus, exposure and white balance are set in the first picture. For this
reason, do not make the first frame overly bright by including the sun or
another light source in the shot.
•
Do not use the Zoom lever after shooting the first picture. This can cause
problems with picture linking.
•
If you take a large number of panorama shots in HQ or SHQ mode, you may
run short of memory on your computer. Use SQ mode to avoid this problem.
•
The flash cannot be used in the Panorama mode.
•
Pictures taken in TIFF (uncompressed) mode are recorded as SHQ mode
images.
Shoot the pictures so that the edges of the subject overlap.
● You can use up to 10 shots to create a panorama picture.
When you have finished
using Panorama mode,
press the (Menu) but-
ton.
● The frame on the screen
disappears and the camera
reverts to normal shooting
mode.
7
6
7
6
Take the shots so that the right edge of the shot
(or the left edge when left overlapping is
selected) overlaps the next shot.