Olympus C-2040ZOOM - Manual (Page 205)

205
1 0
Miscellaneous
Troubleshooting
Problem:
Cause Solution See
When the camera is connected to a computer, an error message appears
during data transfer.
qThe cable is not connected cor-
rectly.
wThe camera is switched off.
eThere are no batteries in the cam-
era.
rThe USB driver is not correctly
installed.
qCheck that the cable is connected
correctly.
wSet the Mode dial to "
".
eLoad new batteries or use the
optional AC adapter.
rCheck whether the camera is cor-
rectly recognized by the computer,
as laid out in the USB driver (or
CAMEDIA Master) installation
guide.
P.194
P.196
P.29,33