Olympus C-2040ZOOM - Manual (Page 204)

204
1 0
Miscellaneous
Troubleshooting
Problem:
Cause Solution See
I cannot display images on the monitor.
qThe camera is set to a shooting
mode.
wThere are no pictures recorded on
the card.
eThere is a fault in the card.
rThe camera is connected to a TV.
qSet the Mode dial to "
".
wThe "NO PICTURE" message
appears on the monitor. Take a pic-
ture and then display the shot.
eRefer to the Error Code chart.
rThe monitor is switched off while the
camera is connected to a TV.
P.138
P.60
P.210
P.143
Problem:
Cause Solution See
The monitor is difficult to see.
qThe monitor brightness is incor-
rectly adjusted.
wYou are looking at the monitor in
sunlight.
qAdjust the monitor brightness.
wUse your hand or another object to
shade the monitor.
P.191
Problem:
Cause Solution See
I cannot protect images, erase frames (single or all), or initialize the
SmartMedia card.
qThere is a write-protect sticker on
the card.
qPeel the sticker off before using the
card. Do not re-use write-protect
stickers.
P.35