Olympus C-2040ZOOM - Manual (Page 170)

8
Mode setup
170
MODE SETUP - Using function settings for easy camera operation
To make the camera even easier to use, you can use the mode setup option
to customize various camera functions. The functions you can customize
include basic camera operations such as adjusting the monitor brightness,
selecting the units of length displayed in the screens, and selecting the
camera's operating beep tones.
Press the (Menu) button.
● The Menu screen appears.
Press or on the
arrow pad to select "MODE
SETUP" and then press
to select "SETUP".
Press the [OK] button.
● The MODE SETUP screen
appears.
Press or to select
the desired setting and
then press
.
● Either the current setting or
"SETUP" will appear on the screen.
Use the appropriate procedure for
the setting you want to customize.
● You cannot take pictures while
the MODE SETUP screen is
displayed.
4
3
2
1
(This screen shows the still picture
shooting menu.)
4 2
3
[ 3 / 3 ]
F2.0 1/800 0.0 P
A/S/M
MODE
CARD
SETUP
MODE
SETUP
SETUP
AE LOCK
This screen shows the still
shooting MODE SETUP menu.
ALL RESET
SHARPNESS
CONTRAST
[ 1 / 4 ]
WB +
-
OFF
ON
CUSTOM
[ 1 / 4 ]
ALL RESET
SHARPNESS
CONTRAST
SETUP WB
Example: When "ALL RESET" is selected Example: When " " is selected
WB
1
ALL RESET
SHARPNESS
CONTRAST
[ 1 / 4 ]
ON
NORMAL
NORMAL
RED • • •
◆
• • • BLUE WB +
-
•
Always return to the Menu screen from the MODE SETUP screen by pressing the [OK] button.
If you use the
(Menu) button to return to the Menu screen, the settings are not saved.