Onkyo MD-105TX - Manual (Page 22)

22
CD-dubbing (System operation)
4
Select a recording mode.
Press the REC MODE button to select the
desired recording mode.
REC MODE
MONO : Monaural recording mode. The
available recording time is twice
as much as that for “SP.”
SP : Normal stereo recording mode.
The recording time is the same
as the time length indicated on
the CD.
LP2 : Normal stereo recording time is
compressed to half. The
available recording time is twice
that for “SP.”
LP4 : Normal stereo recording time is
compressed to a quarter. The
available recording time is four
times that for “SP.”
EDIT/NO
CD Dub Mode?
Fade Album?
DIGITAL IN 1
INPUT
Check the available recording time on the MD.
If the display does not indicate the available
recording time, press the DISPLAY button
repeatedly.
DISPLAY
Note
A disc recorded in LP2 or LP4 mode can be
played only on MD players that support LP2 or
LP4 mode. If you play such a disc on another
MD player, “LP:” may appear on the display.
5
Select a CD dubbing mode.
5-1 Press the EDIT/NO button, then turn the
AMCS knob until “CD Dub Mode?” appears.
5-2 Press the AMSC knob.
The current CD dubbing mode is shown.
(“Fade Album?” indicates that you are
switching from Fade out to Album CD
dubbing mode.)
5-3 Press the AMSC knob.
To cancel the CD dubbing mode setting,
press the EDIT/NO button.
PUSH TO ENTER ( )
AMCS
PUSH TO ENTER ( )
AMCS
MINIDISC RECORDER
STANDBY
CD
INPUT
DUBBING
PUSH TO ENTER ( )
AMCS
DISPLAY EDIT / NO YES
REC
STANDBY / ON
MD- 105 TX
REC MODE
REC MODE INPUT
DISPLAY
EDIT/NO
AMCS
3
Select “Digital In 1.”
Press the INPUT button repeatedly until
“Digital In 1” appears.
Note
CD-dubbing is not possible when “Analog In”
or “Digital In 2” is shown on the display.