Onkyo MD-105TX - Manual (Page 43)

43
Befor
e Using
Connections
Other Information
Operations
Message list
The following table explains the various messages that appear in the display.
Message Meaning
Auto Space This message appears during the track intervals when A. Space is turned on.
Blank Disc A new recordable MD or a recordable MD without disc or track names is inserted.
Cannot Copy An attempt was made to record copyright-protected material. An attempt was made to make a
second copy from a digitally dubbed MD (see “Rules for Digital Recording” on page 45).
Cannot Edit An attempt was made to edit the disc during MEMORY or RANDOM play or in recording standby
mode, or an attempt to edit a premastered disc was made.
Cannot Rec An attempt was made to record onto a premastered (read-only) disc.
CD Dub Fail The CD dubbing operation could not be enabled. Check the connections. (An cable or audio
pin cable is not connected. Or, the amplifier or CD player is not turned on.)
Complete Editing is complete.
D. In Unlock The digital equipment (CD player, DAT, etc.) has not been connected properly. Otherwise, the
connected digital equipment is not operating properly.
Disc Error The disc is abnormal (scratched or missing a TOC).
Disc Full The disc is full (see “System Limitations” on the next page).
Full An attempt was made to enter a character that exceeds the maximum character capacity.
Impossible The disc could not be edited.
Mecha Error An error occurred in the unit’s internal mechanism.
Memory Full An attempt was made to record a 26th track.
Music Scan Music Scan has started.
Name Full Number of characters has reached the limit for input to one MD.
No Change The naming attempt failed.
No Disc There is no disc in the unit.
No Track The inserted disc has a disc title but no tracks.
Over In pause mode (when playing is paused), the (Fast Forward) button was pressed to the end
of the disc.
Protected The inserted disc is record-protected.
Retry Error The recording attempt failed due to a consecutive disturbance or scratches on the MD.
Signal Wait The unit has entered Signal Wait mode.
Synchro Rec Synchro recording has started.
TOC Reading The unit is reading the TOC from the MD.
TOC Writing The unit is writing the recorded or edited contents to the MD.
TOC Error The writing of the recorded or edited contents failed. Something is wrong with the TOC.
Other Information