Onkyo MD-105TX - Manual (Page 32)

32
Synchro-recording from cassette
deck or CD recorder to MD
When your MD-105TX is configured into a
system with Onkyo Separate Collection series
components (A-905TX/R-805TX, K-505TX and
CDR-205TX), synchronized recording from the
cassette deck to the MD recorder is possible.
1
Press the INPUT button
repeatedly until “Analog In”
appears.
• You cannot perform synchro recording
with the “Digital In 1” or “Digital In 2”
input sources.
2
Select a recording mode.
Refer to Step 4 on page 22.
3
Set the MD recorder to the
recording standby mode.
• For information on setting the MD
recorder to recording standby mode
and the necessary preparatory steps,
see “Analog recording” on page 24.
(K-505TX)
4
Start playing the cassette deck
or CD recorder.
The MD recorder starts recording signals
from the tape deck or CD recorder.
If the recording level is not appropriate,
refer to Step 7 on page 25 to adjust the
level.
System operation (continued)
To stop synchro recording
Press the button on the cassette deck or CD
recorder. The MD recorder then enters recording
standby mode.
REC
MINIDISC RECORDER
STANDBY
CD
INPUT
DUBBING
PUSH TO ENTER ( )
AMCS
DISPLAY EDIT / NO YES
REC
STANDBY / ON
MD- 105 TX
REC MODE
INPUT REC
INPUT
(CDR-205TX)