Onkyo TX-SA705 - Manual (Page 80)

80
Advanced Setup—Continued
Speaker Distance
Here you can specify the distance from each speaker to
the listening position so that the sound from each
speaker arrives at the listener’s ears as the sound
designer intended.
Note:
This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
2 Use the Up and Down [ ]/[ ]
buttons to select “2. Speaker
Setup,” and then press [ENTER].
The Speaker Setup menu appears.
3 Use the Up and Down [ ]/[ ]
buttons to select “3. Speaker Dis-
tance,” and then press [ENTER].
The Speaker Distance menu appears.
This setting is set automatically by the Automatic
Speaker Setup function (see page 54).
2-6
1
2, 3
1, 7
ENTER
ENTER
2. Speaker Setup
1. Speaker Settings
2. Speaker Config
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
ENTER
ENTER
2–3. Speaker Distance
Unit feet
Left 12.0ft
Center 12.0ft
Right 12.0ft
Surr Right
7.0ft
Surr Back R 7.0ft
Surr Back L 7.0ft
Surr Left 7.0ft
Subwoofer 12.0ft
Note:
Speakers that you set to No or None on
the Speaker Configuration page
(page 77) cannot be selected.
4 Use the Up and Down [ ]/[ ]
buttons to select “Unit,” and then
use the Left and Right [
]/[ ]
buttons to select:
feet: Select if you want to enter dis-
tances in feet. Can be set from
0.5 to 30 feet in 0.5-feet steps.
meters: Select if you want to enter
distances in meters. Can be
set from 0.15 to 9 meters in
0.15-meter steps.
5 Use the Up and Down [ ]/[ ]
buttons to select “Left,” and then
use the Left and Right [
]/[ ]
buttons to specify the distance.
Specify the distance from the front left
speaker to your listening position.
6 Repeat step 5 for all speakers.
7 Press the [SETUP] button.
The setup menu closes.
ENTER
ENTER
ENTER
ENTER