Onkyo DR-S2.0 - Manual (Page 13)

13 13
REMOTE
CONTROL
OUT
OUT
VIDEO 1 1 – VIDEO – 2
IN IN OUT IN
IN OUT
(REC)
IN
(PLAY)
IN IN
IN
VIDEO 2
VIDEO
1
VIDEO
2
TAPE/MD TV/LINE
MON
OUT
MON
OUT
L
R
S VIDEO
VIDEO
AUDIO
SUB
WOOFER
PRE OUT
CENTER
SPEAKER
SURROUND
SPEAKERS
AUDIO
R L
CENTER
SPEAKER
SURROUND
SPEAKERS
R L
R L R B A L
FRONT SPEAKERS
R L B
FRONT SPEAKERS
R A L
FRONT SPEAKERS
R A L R L B
CENTER
SPEAKER
SURROUND
SPEAKERS
R L
FM 75
ANTENNA DIGITAL OUTPUT
VIDEO 1
(OPT) (OPT) (COAX)
VIDEO 2
DIGITAL INPUT
AM
Y P B P R
COMPONENT VIDEO OUTPUT
+ – + –
+ – + –
+ –
+ – + –
Connecting Speakers
Before connecting
• Refer also to the instruction manuals of the speakers.
• This DVD Receiver is designed to reproduce optimum sound quality
when speakers with the impedances specified below are connected.
Please check the following information and choose speakers with
appropriate impedances for the connections.
Front speakers: 6 ohms min. per speaker
Center speaker: 6 ohms min.
Surround Speakers : 6 ohms min. per speaker
• Strip 10 mm from the end of each cord, then twist the exposed wires
tightly.
• To prevent damage to circuits, never short-circuit
the positive (+) and negative (–) speaker wires.
• Do not connect the speaker cable to the L and R
connectors at the same time and do not connect
more than one speaker to the same speaker
connectors.
Front speakers
Right ch. Left ch.
Surround
speaker
Right ch.
10
mm
Active
subwoofer
Center ch.
Surround
speaker
Left ch.
Connecting to SPEAKERS A
The main speaker system is SPEAKERS A.
Follow the illustration on the right.
How to connect to the speaker
connectors
Press and hold
the lever.
Insert the stripped
end of the cord.
By releasing the
lever, the lever is
replaced.
Front speaker
Right ch.
Front speaker
Left ch.
Connecting to SPEAKERS B
To place the additional speaker system for the second
room, make the SPEAKERS B connection on the right.
NO!
DO NOT connect the
power cord (mains lead)
at this time.
NO! NO!
+
–
L R
+
–
L R