Onkyo DR-S2.0 - Manual (Page 18)

18
Speaker Setup
1
2
3
Unit only Press SPEAKER SETUP.
Smart Configuration is complete.
Press SPEAKER SETUP.
“SmartConfig” appears in the display.
Note
If any display appears other than “SmartConfig,”
press the button repeatedly until “SmartConfig”
appears.
Press SPEAKER A/B to select
“Spk Set A.”
Note
“Spk Set B” also appears by pressing the
button repeatedly, though, this setting is
reserved for future applications. Therefore, be
sure to select “Spk Set A.”
Tip
For precise setting, carry out “Setting the Distance From the Listening
Position to Each Speaker” on page 20.
Setting up the Optional Speaker System –– Smart Configuration Setting
(Only for USA and Canadian models)
Use the Smart Configuration setting to set up the optional speaker system.
The optional speaker system is composed of the following speakers:
• D-30 (front left and right, and surround left and right speakers)
• D-30C (front center speaker)
• SKW-30 (subwoofer)
FM MODE
STANDBY/ON
STANDBY
POWER
PHONES
OFF ON
TUNING/PRESET SURROUND STEREO T – D
DISPLAY
DVD / CD
PRESET MEMORY SUBWOOFER MODE SPEAKER SETUP SPEAKER A / B
ACOUSTIC CONTROL
INPUT
MASTER VOLUME
Display SPEAKER SETUP
You need to set up the speaker configuration for the speaker system connected to the SPEAKERS A connectors (see page 13.)
(There is no speaker configuration setup for the SPEAKERS B system.)
If you purchased the optional speaker system with the DR-S2.0 DVD Receiver, follow the steps in “Setting up the Optional Speaker
System –– Smart Configuration Setting” below.
Follow the steps in “Setting up Non-Optional Speakers” on the next page if:
• Your DVD Receiver is not a USA nor Canadian model, or
• Your speakers are not the optional speaker system of the DVD Receiver.
Notes
• Speaker setup cannot be done if;
– Headphones are connected (see page 33), or
– The SPEAKERS B system is On (see page 32).
• It is not necessary to set the parameters again once you have completed the
setup (with one exception*) unless you change the speaker configuration.
SPEAKER
A / B
SPEAKER
SETUP
SPEAKER
SETUP
SPEAKER A/B
* See “To Listen to a High-Frequency/High-Quantization
Format Source in its Original Sound Quality – 96k Sound”
on page 48.