Playing the connected source, About digital sound, Start playing the selected source – Onkyo DR-S2.0 User Manual

Page 30: See page 34, E.g. when video 1 is selected, Input selector remote controller unit, Dolby digital dts pcm

Advertising
background image

30

DOLBY DIGITAL

DTS

PCM

Playing the Connected Source

This section shows you how to play the
sources connected to the DVD Receiver.

You may need to see “Connecting to a TV”
on page 10 and “Connecting to Audio/Video
Equipment” on page 11 while following the
steps in this section.

About digital sound

If the equipment is digitally connected to the DVD Receiver,
the sound from the digital input will automatically be selected
and reproduced instead of the analog sound as explained
below.
• When the VIDEO 1 source is selected, the digital sound

from the VIDEO 1 DIGITAL INPUT (OPT) connector is
reproduced.

• When the VIDEO 2 source is selected, the digital sound

from the VIDEO 2 DIGITAL INPUT (COAX) connector is
reproduced.

When the digital sound is reproduced, the DOLBY DIGITAL,
DTS, or PCM (2 channel digital stereo) indicator lights up
according to the received sound system in the DVD
Receiver’s display.

Note

The DVD Receiver only reproduces DOLBY DIGITAL, DTS, and
PCM sound formats from connected equipment.

Enjoying the picture with the sound of
another source

Play the VIDEO 2 source and select TAPE/MD, FM, AM, or
TV/LINE. Then you can enjoy the VIDEO 2 picture and the
sound from the selected input source at the same time.

Various Functions While Playing the
Connected Source

To use the following functions, see page 32.
• Turning on/off the SPEAKERS A/SPEAKERS B Systems
• Adjusting the Volume
• Muting the Sound
• Listening Through Headphones
• Controlling the Brightness of the Lights on the DVD Receiver
• Using the Sleep Timer

Enjoying the Sound Effects While
Playing the Connected Source

See page 34.

Press INPUT SELECTOR

/

on

the remote controller or INPUT /
on the unit to select one of the
following input sources:

• VIDEO 1
• VIDEO 2
• TV/LINE
• TAPE/MD

The selected input source appears in the
multipurpose display. Also the input
source indicator is lit in the display until
the DVD Receiver is switched to another
input source.

e.g. When VIDEO 1 is selected.

Start playing the selected source.

1

2

INPUT SELECTOR

Remote

controller

Unit

INPUT

INPUT SELECTOR

MODE

AU

DIO

DVD

TV

TA/MD

LIS

TEN

ING MODE

A.C

TR

L

T – D

STER

EO

SU

RR

TIT

LE

MEN

U

SET

UP

TV/V

CR

RET

URN

CH

TUN

VOL

ENTER

REPEAT

MUTING

A – B

REC

DIMMER

OPEN/CLOSE

RANDOM

SLOW

SUBTITLE – ON / OFF ANGLE

ZOOM

MEMORY CLEAR

AUDIO DISPLAY

-- / ---

SW MODE

LATE NIGHT DISTANCE

CH SEL

T– D SETUP

UP/ DOWN

TEST TONE

SP A

SP B

1

2

3

4

5

6

7

8

9

+10

0

SEARCH

STNBY

ON

SLE

EP

FM MODE

STANDBY/ON

STANDBY

POWER

PHONES

OFF

ON

TUNING/PRESET

SURROUND STEREO

T – D

DISPLAY

DVD / CD

PRESET

MEMORY

SUBWOOFER

MODE

SPEAKER

SETUP

SPEAKER

A / B

ACOUSTIC

CONTROL

INPUT

MASTER VOLUME

DOLBY DIGITAL

DTS

PCM

1

1

VIDEO 1

Advertising