Onkyo HT-R960 - Manual (Page 12)

12
Getting to Know the AV Receiver —Continued
A DIGITAL IN OPTICAL 1 and 2
These optical digital audio inputs are for connecting
components with an optical digital audio output,
such as a CD player or DVD player. They’re assign-
able, which means you can assign each one to an
input selector to suit your setup. See “Digital Input
Setup” on page 47.
B DIGITAL IN COAXIAL 1 and 2
These coaxial digital audio inputs are for connect-
ing components with a coaxial digital audio output,
such as a CD player or DVD player. They’re assign-
able, which means you can assign each one to an
input selector to suit your setup. See “Digital Input
Setup” on page 47.
C COMPONENT VIDEO IN 1 and 2
These RCA component video inputs are for con-
necting components with a component video output,
such as a DVD player, DVD recorder, or DVR (dig-
ital video recorder). They’re assignable, which
means you can assign each one to an input selector
to suit your setup. See “Component Video Input
Setup” on page 47.
D COMPONENT VIDEO OUT
This RCA component video output is for connect-
ing a TV or projector with a component video input.
E HDMI IN 1–4 and OUT
HDMI (High Definition Multimedia Interface) con-
nections carry digital audio and digital video.
The HDMI inputs are for connecting components
with an HDMI output, such as a DVD player, DVD
recorder, or DVR (digital video recorder). They’re
assignable, which means you can assign each one to
an input selector to suit your setup. See “HDMI
Input Setup” on page 46.
The HDMI output is for connecting a TV or projec-
tor with an HDMI input.
F MONITOR OUT
The S-Video or composite video jack should be
connected to a video input on your TV or projector.
G AM and FM ANTENNA
The AM push terminals are for connecting an AM
antenna. The FM jack is for connecting an FM
antenna.
H FRONT L/R, CENTER, SURR L/R, and SURR
BACK L/R SPEAKERS
These terminal posts are for connecting the front
speakers, center, surround, and surround back
speakers.
I REMOTE CONTROL
This (Remote Interactive) jack can be con-
nected to the jack on another -capable
Onkyo component for remote and system control.
To use , you must make an analog audio connec-
tion (RCA) between the AV receiver and the other
component, even if they are connected digitally.
J CD IN
This analog audio input is for connecting a CD
player’s analog audio output.
K TAPE IN/OUT
These analog audio input and output jacks are for
connecting a recorder with an analog audio input
and output, such as a cassette deck, MD recorder,
etc.
L CBL/SAT IN
A cable or satellite receiver can be connected here.
There are S-Video and composite video input jacks
for connecting the video signal, and there are analog
audio input jacks for connecting the audio signal.
Rear Panel
IN IN
IN
IN
IN IN
IN
IN 1(DVD) IN 2(CBL/SAT) OUT
OUT
COMPONENT VIDEO
Y
C B/ P B
C R/ P R
SUB
WOOFER
FRONT SURR SURR BACK CENTER
CD
R
L
TAPE CBL/SAT
CBL/SAT
VCR/DVR
VCR/DVR
DVD
DVD
R
L
R
L
R
L
S
V
MONITOR
OUT
S
V
PRE OUT
SUB
WOOFER
FRONT SPEAKERS B
REMOTE
CONTROL
L
R
L
R
SURR BACK SPEAKERS SURR SPEAKERS FRONT SPEAKERS A
CENTER SPEAKER
ASSIGNABLE
COAXIAL
OPTICAL
1
(DVD)
2
(CBL/SAT)
1
(VCR/DVR)
2
(CD)
DIGITAL IN
ASSIGNABLE
ANTENNA
FM
AM
75
HDMI
(DVD) (VCR/DVR) (CBL/SAT) IN 2 IN 3 IN 4
ASSIGNABLE
OUT
OUT
OUT
IN 1
2
9 J K L M N O P Q
3 4 5 7 1 8 6