Playing your av components, Basic av receiver operation, Uttons (50) – Onkyo HT-R960 User Manual

Page 50: Ol (50), Utton (50)

Advertising
background image

50

Playing Your AV Components

Basic AV Receiver Operation

ON/STANDBY

STANDBY

A SPEAKERS B

TONE

MOVIE/TV

LISTENING MODE

MUSIC

GAME

DISPLAY

MEMORY

CLEAR

DIGITAL INPUT

TUNING MODE

PHONES

MULTI CH

THX

DVD

VCR/DVR

CBL/SAT

AUX

TAPE

TUNER

CD

SETUP

SETUP MIC

VIDEO

L AUDIO R

AUX INPUT

ENTER

RETURN

TUNING

PRESET

MASTER VOLUME

AV RECEIVER

HT-R960

RT/PTY/TP

4

1

4

1

4

Subwoofer’s

rear panel

1

Use the AV receiver’s input selector buttons to select an input source.

To select an input source with the remote controller, use its INPUT
SELECTOR buttons.

To listen to a DVD player connected to the multichannel DVD input (page 30), press
the AV receiver’s [MULTI CH] button. The MULTI CH indicator will appear on the
display.

Note:

• While the multichannel DVD input is selected, the Speaker Configuration settings on

page 81 are ignored, and signals from the multichannel input are fed to the speakers
as they are.

2

To turn the speakers on or off, use the AV receiver’s SPEAKERS [A] and
[B] buttons, or press the [RECEIVER] REMOTE MODE button on the
remote controller and use its [SP A/B] button.

Pressing the remote controller’s [SP A/B] button cycles through the following settings:
Speaker Set A

Speaker Set A&B

Speaker Set B

Off.

Note that while speaker set B is on, speaker set A
is reduced to 5.1-channel playback.
See page 19 for more information about speaker
sets A and B.

3

Start playback on the source component.

To watch a DVD or other video source, on your TV, select the video input that’s con-
nected to the AV receiver’s HDMI OUT, COMPONENT VIDEO OUT, or MONITOR
OUT. On some DVD players, you may need to change the digital or HDMI audio out-
put settings.

4

To adjust the volume, use the MASTER VOLUME control or the remote
controller’s [VOL] button.

Since the AV receiver is designed for home theaters, it has a wide volume range for
precise adjustment. The volume can be set to –

dB, –81 dB, –80 dB through +18 dB.

Make sure the SKW-960 Subwoofer’s output level control is set at the
“THX-POSITION.”

Because our ears are less sensitive to very low bass sounds, there’s a temptation to set
the level of the subwoofer too high. As a rule of thumb, set the subwoofer level to what
you think is the optimal level, and then back it off slightly.

5

Select a listening mode and enjoy!

See “Using the Listening Modes” on page 59.

DVD

VCR/DVR CBL/SAT

AUX

TAPE

TUNER

CD

Remote

controller

AV receiver

A

B

SPEAKERS

Remote

controller

AV receiver

Indicators

Remote

controller

AV receiver

MASTER VOLUME

Advertising
This manual is related to the following products: