Onkyo HT-R960 - Manual (Page 76)

76
Adjusting the Listening Modes
These settings apply to only speaker set A.
The Audio Adjust settings are explained below.
Multiplex/Mono Settings
Multiplex
■ Input Ch
This setting determines which channel of a stereo multi-
plex source is output. Use it to select audio channels or
languages with multiplex sources, multilingual TV
broadcasts, and so on.
Main: The main channel is output (default).
Sub: The sub channel is output.
Main/Sub: Both the main and sub channels are out-
put.
Mono
■ Input Ch
This setting determines which channel is output when
the Mono listening mode is used with a stereo source.
Left+Right: Both the left and right channels are output
(default).
Left: Only the left channel is output.
Right: Only the right channel is output.
■
Output Speaker
This setting determines which speakers output mono
audio when the Mono listening mode is selected.
Center: Mono audio is output by the center
speaker (default).
Left/Right: Mono audio is output by the front left and
right speakers.
PLIIx/Neo:6 Settings
PLIIx Music (2 ch Input)
These settings apply to only 2-channel stereo sources.
If you’re not using any surround back speakers, these
settings apply to Dolby Pro Logic II, not Dolby Pro
Logic IIx.
■ Panorama
With this setting, you can broaden the width of the front
stereo image when using the Dolby Pro Logic IIx Music
listening mode.
On: Panorama function on.
Off: Panorama function off (default).
Using the Audio Adjust Settings
1 Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ]
buttons to select “3. Audio
Adjust,” and then press [ENTER].
3 Use the Up and Down [ ]/[ ]
buttons to select an item, and
then press [ENTER].
4 Use the Up and Down [ ]/[ ]
buttons to select an option, and
use the Left and Right [
]/[ ]
buttons to change it.
The Audio Adjust menu items are
explained below.
2, 3 2–4
1
1, 5
3. Audio Adjust
1. Multiplex/Mono
2. PL II x/Neo:6
3. Dolby EX
4. Theater-Dimensional
5. LFE Level
5 When you’ve finished, press the
[SETUP] button.
Setup closes.