Orion LBI-38888K - Manual (Page 16)

16
MESSAGE NAME DESCRIPTION
VOL=31 Volume Level Indicates the current volume level. The
volume level display ranges from OFF
(silent) to 31 (loudest).
UNKNOWN Caller's ID Not
Received Indicates that an individual call is being
received, but the caller's ID was not received.
TX DATA Transmit Data Trunked mode only. Indicates the radio is
transmitting a data call.
RX DATA Receive Data Trunked mode only. Indicates the radio is
receiving a data call. Displayed on line 2.
DATA OFF Data OFF Trunked mode only. Indicates radio is in the
data disabled state. Displayed on line 1.
DATA ON Data On Trunked mode only. Indicates radio has been
toggled to the data enable state. Displayed for
two seconds on line 1 when toggled to enable
state.
SYSC ON System Scan Features
On Trunked mode only. Indicates the System
Scan features are enabled.
SYSC OFF System Scan Features
OFF Trunked mode only. Indicates the System
Scan features are disabled.
T99 ON Type 99 Decode On Conventional mode only. Indicates the Type
99 Decode feature is enabled.
T99 OFF Type 99 Decode OFF Conventional mode only. Indicates the Type
99 Decode feature is disabled.
NB ON Noise Blanker On Conventional mode only. Indicates noise
blanker feature is enabled on low band (29-50
MHz) version.
NB OFF Noise Blanker OFF Conventional mode only. Indicates noise
blanker feature is disabled on low band (29-
50 MHz) version.
PA ON Public Address On Indicates that the public address function of
the radio is enabled.
PA OFF Public Address OFF Momentary (2 seconds) indicates that public
address function of the radio was disabled.
ALRM ON External Alarm Enabled Indicates that the external alarm function of
the radio is enabled.
ALRM OFF External Alarm
Disabled Momentary (2 seconds) indicates that external
alarm function of radio was disabled.
PVT DIS Private Mode Disabled Indicates that private mode is disabled or no
encryption key has been programmed for the
selected group/channel or special call.
FRCD PVT Forced Private
Operation Indicates that forced private operation has
been pre-programmed into radio.
NO KEY # Encryption Key
Missing Flashing indicator indicates that no
encryption key or an incorrect encryption key
is programmed into the radio.
BCKL=1-6 Backlight Display intensity and keypad back light level.