Orion LBI-38888K - Manual (Page 22)

22
TURNING ON THE RADIO
Rotate the POWER ON-OFF/VOLUME knob clockwise, out of detente to
turn the radio on. A short beep (if enabled through programming) indicates
the radio is ready for operation. The display indicates, if programmed, the
last selected system name on line one and the last selected group or channel
name on line two.
In the EDACS trunked environment, if communication with the system's
control channel cannot be established, the CC SCAN message will be
displayed. This may occur if, for example, the radio is out of range of the
trunking site. It may be necessary to move to another location or select
another trunking system to re-establish the control channel link for trunked
mode operations.
SELECTION MODE RULES
Many operations require selection from a list such as system, group or
phone number. This selection process is handled in the same manner for all
lists. The RAMP control
, and . , SEL, 0-9, *, #, the DEL button and
the c button are used during the selection process. The following
example systems list is used to explain the process:
The hookswitch functions the same as the
c key in I-Call, phone
call, and menu modes.
The following example systems list is used to explain the process:
SYSTEM
1 NORTH
2 SOUTH
3 EAST
4 WEST
After entering a selection mode, the following generic display format will
appear.
X X X X X X X X
Y Y Y = Z Z Z
NOTE