Orion LBI-38888K - Manual (Page 66)

66
Message trunked group calls and individual calls will be answered back in
the mode they were received, assuming the call or hang time is still active.
Individual, phone, all and emergency calls will be transmitted clear if digital
mode is disabled or inoperative.
1. If receiving an analog message trunked call, the radio will respond in
analog mode during the hang time on the working channel.
2. If receiving an analog I-Call, the radio will respond in analog mode
during the hang time.
3. When using the "WHC" feature to respond to an I-Call (after the hang
time has expired), the call will be transmitted in the mode defined by the
system mode as programmed for the current system if the ID being
called is not in the I-Call list. If the ID is in the I-Call list, then the call
will be transmitted as defined by the I-Call mode programmed in the list
for that ID.
DTMF
The overdial and hot keypad features for transmitting DTMF tones are not
available while in the Aegis Digital Mode or ProVoice Digital Mode.
ERROR Messages
If any of the following error messages are displayed, the radio was either
programmed incorrectly or needs servicing:
DSP ERR
ERR=xxxx DSP ERR DIGV ERR
Power Up Only
If the Aegis or ProVoice circuit board is not responding, correctly, one of
the following error messages will be displayed and the radio needs
servicing:
HARDWARE
ERR= 3X
3X will be a number between 30 and 38