Orion LBI-38888K - Manual (Page 58)

58
Adding Channels To A Scan List
1. With scan operation turned OFF select the desired channel to add to the
selected conventional system channel scan list.
2. Press
< or > on the SCAN add/delete control. The current status
will be displayed in column 1 of line one for a time-out period. Press
< to add the channel to the scan list. S is displayed on the line. This
sets the selected channel for non-priority scanning. A second press of
< sets the channel for priority-two scanning and 2 is displayed on line
one. An additional press of
< sets the channel for priority-one
scanning and 1 is displayed on line one. If the priority-one or priority-
two channels are already set and a new channel is then assigned as the
priority-one or priority-two channel, the previously assigned priority
channel will change to non-priority scanning. The priority setting
selection sequence is set and stops at priority-one therefore the channel
must be deleted from the scan list by pressing
> before the channel is
set to a previous priority setting. Any channel that is in a system's
channel scan list will show S, 2 or 1 for the time-out period when it is
the selected channel.
Deleting Channels From A Scan List
1. With scan operation turned OFF select the desired channel to delete
from the selected conventional system's channel scan list.
2. Press
< or > on the SCAN add/delete control. The current status is
displayed for a time-out period. Press
> to delete the channel from the
scan list. S, 2 or 1 turns OFF. Any channel that is not in a conventional
system channel scan list will show a "blank" for the time-out period
when it is the selected channel.
Nuisance Delete
A channel can also be deleted from the scan list, if it is not the currently
selected channel, by pressing
> during scan operation while the radio is
displaying the unwanted channel. The channel will be deleted from the
conventional system's channel scan list in the same manner as if done using
the steps above. Deletions done in this manner will not remain deleted if the
radio is turned OFF and then back ON.