Oricom Secure 500 - Manual (Page 17)

15 BASIC OPERATION
• Press [ ] key repeatedly to select different lullabies.
• Press [ ] key to play.
Parent Unit
• Press [Menu] key and use [ ] key to scroll to "Lullaby".
• Press
[ ] key to confi rm. "Play?" is shown on the display.
• Press [ ] key to play the Lullaby.
• Or press [ ] key to select "Select New" and press [ ] key.
• Use
[ ] or [ ] key to select "Lullaby 1-5", "Own", " Aux"
or "Play All" and press [ ] key. The selected lullaby will
be played.
Stopping the Lullaby Playing
Baby Unit
When a lullaby is playing,
• Press
[ ] to stop playback.
Parent Unit
When a lullaby is playing,
• Press [Menu]. The display shows "Stop Lullaby?".
• Press
[ ] to stop the lullaby.
If an auxiliary player is connected, you must also switch off
the auxiliary player.
Temporarily Stopping the Lullaby Play
You can stop the lullaby play temporarily. This operation is
only available on the parent unit.
When lullaby is playing,
• Press
[ ] to pause. "Paused" is displayed and the " "
icon fl ashes on both units.
• Press [ ] again will resume the lullaby play.
• If lullaby play is not resumed within 60 seconds, lullaby
will stop automatically.
Record a lullaby
Record your own Lullaby or story words up to 2 minutes long.
1. Press and hold [Rec] key on the Baby Unit. You can
start recording after the beep. REC and the recording
time are shown on the display.
2. To end recording, release [Rec].
To play your recorded lullaby, follow the steps for Playing
the Lullaby and select "Own".
Note:
Recording is only available when the memory is empty
(after it is deleted).
The baby unit will stop monitoring during lullaby recording.