Oricom Secure 500 - Manual (Page 5)

3 GETTING STARTED
Installation and Charger
For the Parent Unit
1. Remove the battery cover
on the back of the Parent
U n i t b y p r e s s i n g a n d
sliding it down. Insert the
rechargeable batteries as
marked on the unit and
close the cover again.
2. Place the Parent Unit into
the Charger Pod.
3. Plug the mains adaptor into a mains power socket.
The red charger light on the charger pod will illuminate
indicating that the Parent Unit is charging.
(the light will remain on to ensure
optimum charge is maintained).
DO NOT USE STANDARD/ALKALINE BATTERIES
IN THE PARENT UNIT, AS THERE IS A RISK OF
EXPLOSION AND/OR INJURY. USE ONLY Ni-MH
RECHARGEABLE BATTERIES AS SUPPLIED.
!
WARNING
Thank you for choosing this monitor from Oricom.
Your Secure 500 Baby Monitor offers the best Digital
Technology.
INTERFERENCE
FREE FREQUENCY
DECT (Digital Enhanced Cordless Telecommunications) is the
most widely used worldwide digital cordless technology, offering
amazingly clear sound, long range and maximum voice security.
DECT operates on the 1.8Ghz frequency which eliminates potential
interference from other common wireless devices such as cordless
telephones, wireless networks (Wi-Fi), Bluetooth and cordless
computer devices.
Pack Contents
• Parent unit (receiver)
• Baby unit (sender)
• Mains adaptor with charger pod
• 2 x NiMH rechargeable batteries (type AA, 1300mAh)
• Mains adaptor with power cord
• Wall mounting bracket for the baby unit
• Purple travel bag