16 basic operation, Delete a recorded lullaby, Connect to an auxiliary player – Oricom Secure 500 User Manual

Page 18: Out of range, Low battery

Advertising
background image

16

BASIC OPERATION

Delete a recorded lullaby

1. Press and hold [Rec]. After 2 seconds the display

shows "Deleted".

2. Release [Rec].
• To avoid deleting a recorded message, press [ ] on

the Baby unit to check whether the Own prompt is

displayed. If Own is displayed in the lullaby list, there is

a recorded message.

Connect to an auxiliary player

Plug another player into your Baby unit, to play songs or

stories.

On the Parent Unit:

1 Press [Menu] and use [ ] or [ ] to select "Lullaby".
2 Press

[ ], "Play Lullaby?" is shown on the display.

3 Use

[ ] or [ ] to select "Select New" and press [ ].

4 use

[ ] or [ ] to select "Aux" and press [ ].

You can now use the external player.

On the Baby unit:

1 Plug your player to the auxiliary input socket on the

back of the Baby unit.

2 Press the [ ] key repeatedly until you reach the AUX

menu.

3 You can now use the external player.

Out of Range

When the baby and parent units have no link with each

other (eg. Out of range, parent unit or baby unit is not

powered on), the green Link LED fl ashes. If there is no link

for more than 30 seconds, "Not Linked" will be displayed

on both units. The link break alert will also be emitted from

the speaker of the Parent Unit every 30 seconds. The red

Link LED will flash. When the units are linked, the green

Link LED will be steadily lit.

Note:
Link break alert cannot be manually set on or off, but it can
be suppressed for 4 minutes by pressing any button.
There is only visual alert shown on the Baby Unit.

Low Battery

Baby Unit

When the unit is running on battery power and reaches low

battery level, the display will show Low Battery. Once the

low battery level is reached, the baby unit should still be

able to operate for approximately 30 minutes.

Advertising