Oricom TP170WP - Manual (Page 12)

12
To dial the numbers in the emergency MEMORY Buttons, simply pick up the
handset or press SPEAKER button and press M1 or M2.
Note: the numbers stored in M1 and M2 memory buttons are for manual
dialing only and are not dialled in the emergency call function.
7. The Phone Book
7.1 Storing numbers in the phone book
You can enter up to 30 names and numbers into the Phone book and
choose which of those numbers will be dailled when the Emergency
call function is activated and in which order they will be dialled.
1. Press and release the MENU button until STORE NUMBER is shown.
2. Press the OK button. The cursor will flash in the first position.
3. Enter the required telephone number including the area code (max of 22
characters) press OK button to confirm (both the erase feature and pause
feature can be used when storing the telephone number).
4. Enter the required name (max 16 characters). The next section will explain
how to enter names.
5. Confirm with OK button. The display now shows EMERGENCY OFF.
6. Select EMERGENCY ON or EMERGENCY OFF using the or and
confirm with OK button.
•
If you selected EMERGENCY OFF and press OK, SAVED is shown
and the unit announces “Name Recording for phone book”. That means
the phone number is stored only for normal memory phone dial out,
not for emergency call dial out
To record voice (example ‘John’), hold down OK button, speak clearly
into the microphone after a beep and “VOICE” symbol is flashing.
Release the button when you finished or the unit will stop recording
after 3 seconds. The voice prompt will then be played automatically.
[Recording the Voice is necessary for the personalized talking caller id
and talking phone book feature].
• If you selected EMERGENCY ON, and press OK, “LOCATION” is
shown. Select the required location by pressing or and confirm
with OK button, if the location is in use, the display shows
OVERWRITE? confirm with OK or select another location with or
. Press the OK button and SAVED! is shown.