Oricom TP170WP - Manual (Page 19)

19
9.3 Deleting Numbers from the Caller ID Memory
1. Select the required Caller ID memory location by using the or button.
2.
To delete single memory , press DELETE button once. The display will
show the DELETE?. Press DELETE button for 2 seconds. The data for
that call will be erased, and the CALL# and Caller ID information will be
updated.
To delete all entire memory , press and hold DELETE button until the
display shows DELETE ALL?. Press DELETE for 2 seconds until NO
CALLS appears on the display.
Both the total call and new call counters will reset to zero, and the current
time and date will be displayed.
9.4 CALL BACK (Redial) from the Caller ID Memory
With the handset on the base. Select the required Caller ID memory location
by pressing or . Press CALL BACK button, the speakerphone will
automatically dial the selected number.
Or
Pick up the handset, select the required Caller ID memory location by pressing
or , then press CALL BACK button.
9.5 Copy from the Caller ID to the Phone Book
You can copy Caller ID information to the phone book while you are reviewing
the Caller ID information.
1. Select the required Caller ID memory location by pressing or .
2. Press and hold MENU button for two seconds, display will show COPY
TO MEMORY ?.
3. Press OK button again, display will show SAVED!.