Oricom TP170WP - Manual (Page 18)

18
9. Caller ID
Important: To use Caller ID functions the CLIP symbol must be on. If the
CLIP symbol is not visible on the display, press the
CID
button once.
9.1 Receiving a Call (Can be stored up to 64 calls)
• If an incorrect, invalid or incomplete Caller ID signal is received, the display
shows -ERROR-.
• If only the caller's phone number is received, the display shows the caller's
phone number with the time and date it was received. The NEW symbol
turns on and NEW CALL LED blinks.
Notes:
1. CALL#01 means this data is stored in Caller ID memory location #01.
2. The calling time and date are immediately recorded from the real-time
clock.
• If the callers number is not available due to the caller’s restriction, the
display shows -PRIVATE CALL- with the time and date received. The
NEW symbol turns on and NEW CALL LED blinks.
• If the callers number is not available, the display will show -OUT OF
AREA- with the call’s time and date. The NEW symbol turns on and NEW
CALL LED blinks.
• If a overseas call is received, the display will show -LONG DISTANCE-
with the calls time and date. The NEW symbol turns on and NEW CALL
LED blinks.
Notes:
1. If the Caller ID memory is full, the oldest data will be removed on a first-
in/first-out basis.
2. If the Caller ID information received duplicates another call in memory,
the time/date will be updated and the “REPEAT” symbol will be lit.
3. If no key is pressed within 20 seconds, the display will display the total
call counter, new call counter, current time and date.
9.2 View the Caller ID Memory
Press to review more recent calls. The CALL# will increase.
After you view the most recent data in memory, the display will show END
OF LIST.
Press to review older calls. The CALL# will decrease.
After you view the oldest data in memory, the display will show END OF
LIST.
If the data in memory is being reviewed for the first time, the NEW symbol
will be lit. The NEW CALL LED will off if you review the data.
If no key is pressed within 20 seconds, the display will display the total call
counter, new call counter, current time and date.