Oricom TP170WP - Manual (Page 16)

16
8 Emergency Call feature
THE EMERGENCY CALL FUNCTION WILL NOT OPERATE UNLESS ALL THE
PROCEDURES IN THE USER GUIDE HAVE BEEN COMPLIED WITH.
This feature allows you to summon assistance from the people in emergency
phone list.
8.1 Emergency Message
Two options are provided for your emergency message:
A. A pre-record message "This is an emergency call, to accept this call
press 0". This message will be played unless you decide to record your
own message.
B. Your own recording (max. recording time 20 secs).
This can be any message of your choice, but should always end with the
phrase "to accept this call press 0 now.
8 .2 To record your emergency message
1. Press and release the MENU button until the RECORD MESSAGE is
shown.
2. Press and hold the OK button. After the beep start your message (keep a
distance of 15 cm from the telephone so that you can speak into the
microphone).
3. Release the OK button after you have finished your emergency message.
The message will now play back for you to review.
8.3 To check your emergency message
You can check the emergency message at any time.
1. Press and release the MENU button until the CHECK MESSAGE is shown.
2. Then press the OK button to play back the message.
8.4 To delete your own emergency message and use the pre-
recorded message
If you have recorded your own message, you can delete this and by doing so
use the pre-recorded message.
1. Press and release the MENU button until the CHECK MESSAGE is shown.
2. Then press the OK button to play back the message.
3. During the playback, press DELETE button. Your own message will be
deleted and you will now use the pre-recorded emergency message.