Onkyo R-801A - Manual (Page 23)

23
If you wish to know which RDS station has
been used to set the clock by ACCUCLOCK, or
to use a different RDS station signal to set
the clock, follow the steps below:
1
Press the TIMER button repeatedly
until “ADJUST” is selected on the dis-
play, then press the ENTER button.
“AUTO” or “MANUAL” appears on the
display.
2
If “AUTO” appears on the display,
press the ENTER button. If “MANUAL”
appears on the display, press the
or
button to select “AUTO,” then
press the ENTER button.
The example shown above indicates that the
ACCUCLOCK function uses the RDS station
whose information appears on the display
(FM 88.10 MHz). If the frequency of the RDS
station has not been specified, “--:--”
appears instead of the frequency of the sta-
tion. If you wish to change the selected RDS
station or if no RDS station is selected,
choose the desired RDS station by using the
or button, then press the ENTER
button.
TIMER
ENTER
REPEAT
STANDBY/ ON
TAPE
TAPE REW TAPE FF
SLEEP TIMER ENTER CLOCK
MODE
CLEAR
SCROLL
CDR/PC
CD/ DVD MD FM AM
ACOUSTIC PRESENCE
INPUT SELECTOR
TAPE
CDR/PC
CD/DVD
MD
VOLUME
MUTING
7 8
9 10/0
4
5 6
2 3 1
--/---
UP
DOWN ,
Confirming/changing the RDS
station used by ACCUCLOCK
ENTER
TIMER
ENTER
MHz