Onkyo R-801A - Manual (Page 40)

40
Using the timer
Before using the timer for listening to or
recording broadcast programs, you need to
store the preset stations. (Refer to “Receiv-
ing stations” on page 31, 32 for information
how to preset stations.)
1
Press the TIMER button repeatedly
until “W.DAY OFF” or “W.END OFF” is
displayed, and press the ENTER button.
“ON” and “OFF” indicate whether the
timer is currently set. The initial setting is
“OFF.”
2
Press the or button to set the
ON time, and press the ENTER button.
Notes
• You can also use the number buttons
instead of the or button to set
the desired playing ON and OFF times. To
do so, refer to step 3 on page 24 and
select the 24-hour display. You cannot use
the number buttons if you select the 12-
hour display.
• When you store the ON time, the display
automatically indicates that the OFF time
is one hour after the ON time you speci-
fied.
3
Press the or button to select
the OFF time, and press the ENTER
button.
4
Press the or button to select
the source (FM, AM, CD (or DVD), MD,
CDR, TAPE), and press the ENTER but-
ton.
If you select “FM” or “AM”, press the
or
button again to select the preset
number and press the ENTER button.
If you select “CDR,” the display indicates
“CDR/PC” at the programmed time.
(continued on the next page)
REPEAT
STANDBY/ ON
TAPE
TAPE REW TAPE FF
SLEEP TIMER ENTER CLOCK
MODE
CLEAR
SCROLL
CDR/PC
CD/ DVD MD FM AM
ACOUSTIC PRESENCE
INPUT SELECTOR
TAPE
CDR/PC
CD/DVD
MD
VOLUME
MUTING
7 8
9 10/0
4
5 6
2 3 1
--/---
UP
DOWN
TIMER
ENTER
,
Programming to play at a speci-
fied time
TIMER
ENTER
ENTER
ENTER
ENTER