Onkyo R-801A - Manual (Page 44)

44
Using the timer
The Sleep function can be performed only by
using remote controller.
The SLEEP timer automatically sets the entire
system to Standby mode after a specified
period of time.
1
Start playing something you would
like to listen to.
(CD, tape, MD or radio broadcast).
2
Press the SLEEP button repeatedly to
set the desired sleep time.
The time value will decrease from 90 min-
utes to 10 minutes in steps of 10 minutes.
After a specified period of time, the unit
will be automatically placed in Standby
mode.
• To check the remaining time while the
SLEEP function is active, press the SLEEP
button.
• After CD dubbing is complete, the unit
will be placed in Standby mode.
Cancelling the SLEEP setting
Press the SLEEP button repeatedly until the
SLEEP indicator on the display disappears.
• Make sure that the clock has been set cor-
rectly before setting the timer.
• After setting the timer, be sure to set this
unit in Standby mode. If this unit is not in
Standby mode, the timer will not work.
• When the power is turned on by one of
the timer mode settings, the other timer
modes may not be activated at their ON
time. The power will be switched off by
the first timer mode at its OFF time. Set a
gap of one minute or more between the
OFF time and ON time for each timer set-
ting. (See the figure below.)
• If you press the SLEEP button during timer
play or timer recording, the power will be
switched off at the SLEEP timer’s OFF
time.
• If more than two timer mode settings are
made at the same time, the “WEEKDAY”
setting has the priority over the “WEEK-
END” setting. The “REC” mode setting
has no priority.
• The timer recording setting will be can-
celled if the recording does not start at
the ON time (for example, if the power is
already on).
REPEAT
STANDBY/ ON
TAPE
TAPE REW TAPE FF
SLEEP TIMER ENTER CLOCK
MODE
CLEAR
SCROLL
CDR/PC
CD/ DVD MD FM AM
ACOUSTIC PRESENCE
INPUT SELECTOR
TAPE
CDR/PC
CD/DVD
MD
VOLUME
MUTING
7 8
9 10/0
4
5 6
2 3 1
--/---
UP
DOWN
SLEEP
Sleep function
SLEEP
Notes for timer setting
WEEKDAY
REC
WEEKEND
activate
activate
Time
ON
9:00
OFF
10:00
ON
11:00
OFF
12:00
not activate